优化石化污水处理提标装置药剂投加分析

石油化工安全环保技术 ›› 2021, Vol. 37 ›› Issue (6): 53-55.

优化石化污水处理提标装置药剂投加分析

刘庆洁　代蓓蓓　季雅晴　王国栋

中国石油化工股份有限公司天津分公司，天津 300271

收稿日期:2021-01-06 出版日期:2022-01-26 发布日期:2022-01-26
通讯作者: 刘庆洁 E-mail: liuqingjie.tjsh@sinopec.com
作者简介:刘庆洁，女，2005 年毕业于天津城市建设学院给水排水工程专业，学士，主要从事质量管理及三剂管理方面的工作，高级工程师。电话：17695821201， E-mail: liuqingjie.tjsh@sinopec.com

Optimization of Reagent Dosing in Upgrading Plant for Petrochemical Wastewater Treatment

Liu Qingjie, Dai Beibei, Ji Yaqing, Wang Guodong

SINOPEC Tianjin Company, Tianjin, 300271

Received:2021-01-06 Online:2022-01-26 Published:2022-01-26
Contact: Liu Qingjie E-mail: liuqingjie.tjsh@sinopec.com

摘要/Abstract

摘要： 针对某石化污水提标装置中使用的乙酸钠和聚合氯化铝投加量较高的问题展开分析，通过理论计算及现场实际调研，将乙酸钠投加量的BOD5 ：TN 的比值由最初的5~6 降低至4，聚合氯化铝的使用量根据进水总磷及外排总磷的数值及时调整。在保证外排达标的前提下，将乙酸钠的投加量由最初的0.39 kg/t 降至0.33 kg/t，聚合氯化铝的投加量由最初的0.3 kg/t 降至0.06 kg/t，有效降低了药剂投加量。

关键词: 石化污水处理, 提标装置, 聚合氯化铝, 乙酸钠, 药剂投加

Abstract: This paper analyzes problem of high dosage of sodium acetate and polymeric aluminum chloride used in a petrochemical wastewater upgrading device. Through theoretical calculation and field investigation, the ratio of BOD5: TN of sodium acetate dosage was reduced from 5 ~ 6 to 4, and the dosage of polyaluminum chloride was adjusted in time according to the value of total phosphorus in influent and discharged. On the premise of meeting the discharge standard, the dosage of sodium acetate was reduced from the initial 0.39kg/t to 0.33kg/t, and the dosage of polyaluminum chloride was reduced from the initial 0.3kg/t to 0.06kg/t, which reduced the dosage effectively.

Key words: petrochemical wastewater treatment, upgrading plant, polyaluminum chloride, sodium acetate, reagent dosing

刘庆洁　代蓓蓓　季雅晴　王国栋. 优化石化污水处理提标装置药剂投加分析[J]. 石油化工安全环保技术, 2021, 37(6): 53-55.

Liu Qingjie, Dai Beibei, Ji Yaqing, Wang Guodong. Optimization of Reagent Dosing in Upgrading Plant for Petrochemical Wastewater Treatment[J]. Petrochemical Safety Technology, 2021, 37(6): 53-55.